Item	Presenter	Notes
Last Flight Test	Nathan Green	Comp sim 1 went well Didn’t crash Completed 1.5 laps on old batteries RFD900 worked, LTE dropouts were still present
Next Flight Test	Nathan Green	This Saturday, March 30th Testing new LTE system with phone instead of Raspberry Pi Testing new batteries
Upcoming Team Events	Smile Khatri	Paintball at 7pm on April 5th (Friday next week), this is different from the announcement in discord as it was rescheduled. React in #announcements if you are interested.
Last work session	Smile Khatri	Finished machining the last arm connector Houston 3/4 finished. Need to fix/possibly remake one of the landing gear legs Most of the jigs were machined. Need to remake some brackets and drill holes on a couple of tubes
Next Work Session	Smile Khatri	We will be doing layups for the new cabin on Friday, this is not a formal work session but you are welcome to stop by. Likely around 2pm
Other Annoucements	Smile Khatri	Competition Interest Form: If you are interested in going to competition, please fill this out as soon as possible - CLOSES ON MONDAY, MARCH 31 https://forms.gle/1RKeZdagaXZSUgN29 Planning to assemble the new cabin on the 6th/7th of April Cut CF tubes for Pegasus 2 prior to exams (April 8-11th) The goal is to have Pegasus 2 mechanically assembled before exams and handed off to EE to wire

Item	Presenter	Notes
Electronics Cases	Nathan Green	Gemini case first revision is complete and will be printed/tested
Antenna Tracker	Arjun Mandair	Made Purchase request for yaw servo sheet metal. Will order once approved. Justin Liu finished up the drawings. To me they seem fine, however, I would like a second opinion All we really need is the dimensioning for the countersinks Sohee Yoon has been working on the AKK mount To be honest, I have no idea how to review this design. Look’s very cool, but I’m not too sure about tolerancing and 3D printing. I also believe somebody is working on the small box? How’s the progress on that?
Frame		Arm connectors have been CNCd. Need to mill out holes on the tube portion and tap them Landing gear prototype and jig to be machined tomorrow
Cabin	Evan Janakievski Sohee Yoon	Close to final iteration of the cabin. Been working on organizing and simplifying the designs. Waiting on door hinge design from Divit Gawri Otherwise, other items are ready for review. Update on seats? -Nathan Sohee and Evan cut down most of the curves on the seats to make it a simpler extrusion. We can simplify it more if needed.
New Tasks