...
Need a 360 lidar mount for Houston
Constraints
To be written by the Project Manager. All constraints should be their own row of the table, if a constraint is removed it should be crossed out but left in the table. The append date is when the constraint was last updated (update this when constraints are removed!) DELETE THESE INSTRUCTIONS BEFORE PUBLISHING
Constraints | Written By | Append Date |
|---|---|---|
Lidar should remain as free as possible of FOD / kickback on takeoff | 2023/11/25 | |
Lidar should not have obstructions around it in 360 FOV. | 2023/11/25 | |
Use the provided mounting holes | 2023/11/25 | |
Lidar to be mounted either right side up or upside down | 2023/11/25 | |
Communication cable must be accessible either by removing the lidar or through open area below | 2023/11/25 | |
Beam width can be assumed to be 3 degrees at absolute worst case. Nominally <0.5 degrees from spec sheet | 2023/11/25 |
...