Random questions
Redundancy/Fault Tolerance
Do we want to have redundant sensing? No
Research
Where are all the sensors mounted?
Figure out Pixhawk Sensor Stack?
Pixhawk Sensor Stack
Current Spike 2020-2021 Sensor Stack Breakdown
Camera:
GoPro
GPS:
NEO-M8N GNSS GPS Module: https://www.u-blox.com/sites/default/files/NEO-M8-FW3_DataSheet_UBX-15031086.pdf
Possible issues that come with GPS
Large error bound
Slow update rates (1Hz)
Signal interference (weather, etc.)
Ultrasonic Sensor:
MB1013-00 Ultrasonic Sensor Module: https://www.maxbotix.com/documents/HRLV-MaxSonar-EZ_Datasheet.pdf
Where is the sensor facing (down, or whatever)
IMU (Inertial Measurement Unit):
BMX160 IMU: https://www.mouser.com/pdfdocs/BST-BMX160-DS000-11.pdf
Provides functionalities such as accelerometer, gyroscope
Barometric Pressure Sensor:
MPL3115A2: https://www.nxp.com/docs/en/data-sheet/MPL3115A2.pdf
Used to calculate altitude based on pressure.
Using a barometric pressure sensor vs. GPS :
Doesn’t rely on orientation
Doesn’t get fooled if you are flying over something
HARDER to use due to aerodynamics principles (Bernoulli's principle)
Airspeed Sensor:
UNKNOWN MPN