PPM

/* Set the value of a specific channel (0.0-1.0). Returns 1 if success, 0 if failed. */
virtual uint8_t setChannelValue(uint8_t channel, float value) = 0;

/* Initialize the RC output. */
virtual void init() = 0;

/* A callback that gets called after each RC value is sent. */
virtual void interrupt_callback(TIM_HandleTypeDef* timer) = 0;

/* Constructor */
PPMChannelOut(TIM_HandleTypeDef* timer, uint16_t timer_channel, uint8_t num_channels);

/* Implementation of the RcSender Interface. See LOS_D_RcSender.hpp */
uint8_t setChannelValue(uint8_t channel, float value);

/* Implementation of the RcSender Interface. See LOS_D_RcSender.hpp
  * After initialization, we will be constantly sending PPM signals.
  */
void init();

/* Implementation of the RcSender Interface. See LOS_D_RcSender.hpp */
void interrupt_callback(TIM_HandleTypeDef* timer);

/* Set the number of channels. Returns 1 if success, 0 if failed. */
uint8_t setNumChannels(uint8_t num_channels);