Overview

Now that we have images exclusively of blue landing pad(s), we can now label them.

Credentials

Username: warg-[ID]@warg.warg

• Where [ID] is: 0a , 0b , 0c , 1a , 1b , 1c , 2a , 2b , 2c

More accounts will be created if required.

0: PICT0016 (200), PICT0017 (500), PICT0021 (2x600)

1: PICT0019 (3x500)

2: PICT0015 (3x400), PICT0021 (2x600)

Instructions

1. Go to https://app.roboflow.com/

2. Sign in with one of the credentials above.

3. Select warglandingpad.

4. Go to Annotate on the left.

5. Assign a group of images to yourself (you can see the current account in the top right).

6. Click Start Annotating.

7. For each image:

   1. On the right, make sure the mode is in Bounding Box Tool.

   2. Using the mouse, draw a box around each blue landing pad.

      1. 

      2. Only draw boxes around whole landing pads! Do not on clipped landing pads.

      3. If there are no whole landing pads, click the bottom of the toolbar at the right to mark as null.

   3. Enter/return key to save label (pad-blue).

   4. Use the arrow key or the arrows at the top to go to the next image.

8. Repeat 6 until done. Click on the back arrow in the top left to leave.

9. Repeat 4 (get a new set of images to annotate).