Overview

Now that we have images exclusively of blue landing pad(s), we can now label them.

Credentials

Username: warg-[ID]@warg.warg

• Where [ID] is: 0a , 0b , 0c , 1a , 1b , 1c , 2a , 2b , 2c

Password: See pinned message in #landing-pad .

Account hold and progress sheet: Here. More accounts will be created if required.

Instructions

1. Check the spreadsheet for batches to label.

   1. Batches are grouped by account number (e.g. 0a , 0b , 0c ).

2. Go to Sign in to Roboflow and sign in with an available account.

3. In the top left under Workspaces, select warglandingpad.

4. In the centre, select the warglandingpad project.

5. Go to Annotate on the left.

6. Assign a batch of images to yourself (you can see the current account in the top right).

   1. If you’ve already assigned a batch of images, click on that batch instead.

7. Click Start Annotating.

   1. Or click on an image.

8. For each image:

   1. On the right, make sure the mode is in Bounding Box Tool.

   2. Using the mouse, draw a box around each blue landing pad. Use the black edge as reference (ignore the tag and any colour blur outside the edge).

      1. Open

         

         Make sure that the landing pad is completely within the green lines!
      2. Open

         

         No random space between the lines and the edge, and no clipping the pad with the box.

      3. Only draw boxes around whole landing pads! Do not on clipped landing pads (either edge of image or by landing leg, text is fine though).

      4. If there are no whole landing pads, click the bottom of the toolbar at the right to mark as null.

   3. Enter/return key to save label (pad-blue).

   4. Use the arrow key or the arrows at the top to go to the next image.

9. Repeat 6 until done.

   1. Click on warglandingpad in the top left to leave the editor.

10. Repeat 4 (get a new batch of images to annotate).