Big Project | Project | Project Manager |
|---|---|---|
EE Development and Test | N/A |
Task Description
We need to create a case for holding and protecting the Gemini board during testing. Information can be found ELRS Gemini TX and Gemini Enclosure Requirements
Constraints
Constraints | Written By | Append Date |
|---|---|---|
EE | 2024-02-16 |
Relevant Contacts
Subteam | Contact | Contact Description |
|---|---|---|
EFS | EFS Lead that will answer any software specific questions. | |
EE | EE Member providing information on PIN exposure. |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
Gemini Board Case |
Task Progression/Updates
Author: Merek Lohnes
Date: 2024/03/20
Created outer case and cover in SolidWorks. Designed it similar to the RPI Case. Added place for 2 fans for the TX Modules.
Date: 2024/03/23
Working on adding vents and integrating all the constraints.
- U2 and U6 coax cable openings
- Openings for J1, J3, J5 (3mm clearance for J5 and 2mm clearance for J1, J3)
- Hole for status LED (can use translucent material to cover the hole)
- Openings in top of enclosure for J2, J4, J6, J7 (0.5mm clearance)
- Reset buttons needs to be accessible when cover is on
- Chip Antenna Openings
Date: 2024/03/24
Sending for Design Review