ELRS Gemini Case

 

Big Project

Project

Project Manager

Big Project

Project

Project Manager

EE Development and Test

N/A

 

Task Description

We need to create a case for holding and protecting the Gemini board during testing. Information can be found ELRS Gemini TX and Gemini Enclosure Requirements

image-20240120-222604.png

 

Constraints

Constraints

Written By

Append Date

Constraints

Written By

Append Date

Gemini Enclosure Requirements

EE

2024-02-16

Relevant Contacts

Subteam

Contact

Contact Description

Subteam

Contact

Contact Description

EFS

@Hardy Yu

EFS Lead that will answer any software specific questions.

EE

@Farris Matar

EE Member providing information on PIN exposure.

Assignees

Assignee

Asana Task

Date

Assignee

Asana Task

Date

@Merek Lohnes

Gemini Board Case

 

Task Progression/Updates

Author: @Merek Lohnes

Date: 2024/03/20

  • Created outer case and cover in SolidWorks. Added an area for 2 fans for the TX Modules.

  • Fans are meant to be snapped into place using the hooks on the cover.

  • Heat sets will be used to mount the cover to the case.

  • Utilizing the Gemini Board 60x90mm pattern for mounting holes at the bottom of the case.

Date: 2024/03/23

  • Working on adding vents and integrating all the constraints.

U2 and U6 coax cable openings
Openings for J1, J3, J5 (2.5mm clearance for J5 and 1.5mm clearance for J1, J3)
Hole for status LED (can use translucent material to cover the hole)
Openings in top of enclosure for J2, J4, J6, J7 (0.5mm clearance)
Reset buttons needs to be accessible when cover is on
Chip Antenna Openings

Date: 2024/03/24

  • Sending for Design Review

 

image-20240324-204023.png