ZP3 Case
- Nathan Green
- Merek Lohnes
Big Project | Project | Project Manager |
|---|---|---|
N/A | ZeroPilot 3.0 | @Nathan Green |
Task Description
A case for EE’s ZP3 board and interface. The STEP files for the boards can be found in WARG_CAD\COMP2024\Electronics\ZP3 on PDM.
Constraints
Constraints | Written By | Append Date |
|---|---|---|
Pins are easily accessible | @Nathan Green | 2024/01/17 |
2x XT60 Power is easily accessible | @Nathan Green | 2024/01/17 |
SD Card slot accessible | @Nathan Green | 2024/01/17 |
30x30mm (or a multiple of) M3 mounting holes | @Nathan Green | 2024/01/17 |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
@Merek Lohnes | 2024/01/17 |
Task Progression/Updates
2024/01/17:
Task description and constraints created.
Author: @Merek Lohnes 2024/01/20:
Took measurements of the existing case for the ZP3. Planning to finish CAD the following week.
Author: @Merek Lohnes 2024/01/29:
Finished the CAD during the previous week. Looking to get a design review now. The CAD model is split up into two configurations. One with 30x30mm mounting holes and one without.
Without mounting holes:
With mounting holes:
The mounting holes are located on the bottom. All holes are M3.5 clearance to allow for M3 heat sets to be inserted. There is holes for the SD card and both XT60 power ports. Pins will be oriented towards the top so they’re accessible. The case is meant to be a tight fit.