Standoff L-Bracket Drawings and DXFs
- Arjun Mandair
- Evan Janakievski
- Alison Thompson
Big Project | Project | Project Manager |
|---|---|---|
Antenna Tracker | Drawings and DXFs | @Arjun Mandair |
Task Description
Create the Drawings and DXF files for the L-Brackets:
WARG_CAD\COMP2024\Antenna Tracker\Yaw-And-Pitch Antenna Tracker
Assignees
Assignee | Asana Task | Date |
|---|---|---|
@ assignee | Date assigned |
Task Progression/Updates
Author: @Evan Janakievski Date: 2024/01/30
Created DXF in WARG_CAD\COMP2024\Antenna Tracker\Yaw-And-Pitch Antenna Tracker/Drawings and DXFs
WARG_CAD\COMP2024\Antenna Tracker\Yaw-And-Pitch Antenna Tracker is file name
Also created drawing for the part in the same folder as DXF
Author: @Alison Thompson Date: 2024/01/30
Dxf looks good!
Drawing comments:
Need to use flattened view for the view on the right, don’t need to dimension hole locations because they aren’t important for bending and will be made by the waterjet, don't need dual dimensions (recent CAD guideline change, I promise I will change sheet format soon)
Author: @Evan Janakievski Date: 2024/01/31
It was already the flattened view on my side. Not sure why it didn’t show up for you. Made the adjustments to dual dimensions and removed hole callouts and such.