Pegasus - OFS Mount
Big Project | Project | Project Manager |
---|---|---|
Pegasus | Electronics Mount | @Nathan Green |
Task Description
Design and 3D print a mount for the Optical Flow Sensor which will replace the monster mount. Essentially, remove all other aspects of the monster mount so that only the OFS is mounted.
Monster Mount - Mechanical - WARG (atlassian.net)
Optical Flow (OFS) - SysInt - WARG (atlassian.net)
Constraints
Constraints | Written By | Append Date |
---|---|---|
Mounted where the monster mount is currently located | @Smile Khatri | April 2, 2024 |
FOV of the OFS is not obstructed by anything | @Smile Khatri | April 2, 2024 |
Relevant Contacts
Subteam | Contact | Contact Description |
---|---|---|
Subteam collaborating with | @ of contact | what is the contact responsible for? |
Assignees
Assignee | Asana Task | Date |
---|---|---|
@Smile Khatri | link to asana task assigned | Date assigned |
Task Progression/Updates
Author: @Smile Khatri : 2024/05/03
UPDATE
Ziptie and double-sided yellow sticker secures the OFS to the mount
the mount clips onto the arm and can be tightened down to fix its position along the longitudinal axis of the arm