Big Project | Project | Project Manager |
|---|---|---|
EE Development and Test | N/A |
Task Description
We need to create a case for holding and protecting the Gemini board during testing. Information can be found ELRS Gemini TX and Gemini Enclosure Requirements
Constraints
Constraints | Written By | Append Date |
|---|---|---|
EE | 2024-02-16 |
Relevant Contacts
Subteam | Contact | Contact Description |
|---|---|---|
EFS | EFS Lead that will answer any software specific questions. | |
EE | EE Member providing information on PIN exposure. |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
Gemini Board Case |
Task Progression/Updates
Author: Merek Lohnes
Date: 2024/03/20
Created outer case and cover in SolidWorks. Added an area for 2 fans for the TX Modules.
Fans are meant to be snapped into place using the hooks on the cover.
Heat sets will be used to mount the cover to the case.
Utilizing the Gemini Board 60x90mm pattern for mounting holes at the bottom of the case.
Date: 2024/03/23
Working on adding vents and integrating all the constraints.
- U2 and U6 coax cable openings
- Openings for J1, J3, J5 (3mm clearance for J5 and 2mm clearance for J1, J3)
- Hole for status LED (can use translucent material to cover the hole)
- Openings in top of enclosure for J2, J4, J6, J7 (0.5mm clearance)
- Reset buttons needs to be accessible when cover is on
- Chip Antenna Openings
Date: 2024/03/24
Sending for Design Review
