Brief

WARG has our own internal connector standards for lots of things, however, generally a lot of peripherals connect to a Pixhawk and we are starting to build custom hardware intended to replace the Pixhawk and custom hardware intended to replace Pixhawk peripherals. Consequently this document contains the standards. If WARG does not have a specific connector selected for something please default to using these standards. The Pixhawk is a super common COTS device so it’s standards are adopted by the industry for hobbiest projects of our scale.

Standards

Wiring

• [Pixhawk Connector (v6x)] https://github.com/pixhawk/Pixhawk-Standards/blob/v6xupdate/DS-009%20Pixhawk%20Connector%20Standard.pdf

• https://docs.px4.io/main/en/assembly/cable_wiring.html

Other

• [Pixhawk Bus Standard (v6x)] https://github.com/pixhawk/Pixhawk-Standards/blob/v6xupdate/DS-010%20Pixhawk%20Autopilot%20Bus%20Standard.pdf