Pixhawk Electrical Connector Standards
Background
WARG has our own internal connector standards for lots of things, however, generally a lot of peripherals connect to a Pixhawk and we are starting to build custom hardware intended to replace the Pixhawk and custom hardware intended to replace Pixhawk peripherals. Consequently this document contains the standards. If WARG does not have a specific connector selected for something please default to using these standards. The Pixhawk is a super common COTS device so it’s standards are adopted by the industry for hobbiest projects of our scale.
Standards
Wiring
Pixhawk-Standards/DS-009 Pixhawk Connector Standard.pdf at v6xupdate · pixhawk/Pixhawk-Standards
Defines ordering of pins for custom boards
Cable Wiring Basics | PX4 Guide (main)
Defines twisting we should be using for harness designs
Other
[Pixhawk Bus Standard (v6x)] Pixhawk-Standards/DS-010 Pixhawk Autopilot Bus Standard.pdf at v6xupdate · pixhawk/Pixhawk-Standards
[Pixhawk Autopilot (v6x)] Pixhawk-Standards/DS-012 Pixhawk Autopilot v6X Standard.pdf at master · pixhawk/Pixhawk-Standards