Attendance
add your name here if you plan to attend so we have a sense of numbers!
Pre-worksesh Knowledge
We will be doing hands-on bringup of boards using stencils, solder paste, and toaster/reflow ovens. If you do not have experience with this, it is highly recommended to watch these videos to get an understanding of what we’ll be doing in this session!
https://www.youtube.com/watch?v=WDIqtGMROjM&pp=ygUcaG93IHRvIHVzZSBhIHN0ZW5jaWwgZm9yIHBjYg%3D%3Dhttps://www.youtube.com/watch?v=uXvXwzQf1gU&t=3s&pp=ygUcaG93IHRvIHVzZSBhIHN0ZW5jaWwgZm9yIHBjYg%3D%3DWorksesh Goals
Bring up CAN boards
ESC CAN adapter is the only one with all components
Boards + components for 5 people to bring-up
Will be using Toaster oven for this work session
Bring up Tracking Antenna
should have all components, will have to gather them though
High priority + requires delicate handling (only 2 boards)
Ideally done with at least one experienced member
Possibly validate ESC CAN adapter
continuity
shorts
tomb-stoned components
Assign boards/projects to sub-team members
Some boards that are still waiting to be assembled (not part of F24 Order):
Michael’s Buck (24V to 12V or 5V)
Nolan’s Tracking Antennae
Board bringup priority:
CAN
ESC CAN adapter will likely be easier to assemble (1 sided, few components)
comp critical
motor mount LED boards
should be done ASAP