Big Project | Project | Project Manager |
|---|---|---|
Eclipse | Wings |
Task Description
We need to mount our GPS to the wing. This is the GPS we have chosen https://holybro.com/products/m9n-gps. Currently on Pegasus, it's mounted with the legs. For Eclipse, we want to preserve the wing profile as much as possible so keeping it low profile will be helpful. Brainstorming some ideas would be good but general location should be towards the end/tip of the wing:
Constraints
Constraints | Written By | Append Date |
|---|---|---|
Located at tip of wing |
| |
3D printed (keep as lightweight as possible) |
|
Assignees
Assignee | Asana Task | Date |
|---|---|---|
|
Task Progression/Updates
Author: Evan Janakievski Date:
Initial Design
Designed to be inserted into spar and mounted with two fasteners.
Can be changed to be press fit in both axes, not just one. Would be just one screw instead.
GPS mounts in odd mounting pattern but will be secured using the four holes
Will be 3D printed and the GPS plate will be outside of the spar.
Author: Nathaniel Li Date:
CAD Review 1
Looks really good, approved by me
I’ve updated the both wing assemblies with it
