Big Project | Project | Project Manager |
|---|---|---|
Comp 2025 | Payload |
Task Description
Need to redesign so allow hovering to pick up and drop off water
Constraints
Constraints | Written By | Append Date |
|---|---|---|
Minimal changes |
| |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
link to asana task assigned | Date assigned |
Task Progression/Updates
Author: Alison Thompson Date:
CHANGES FOR REVIEW
Removed the hole on the bottom on the tank, replaced with tube mount, which should have a ziptie tightened around it to hold the outlet tube. Slots are added so water will still reach the tube.
These holes were widened (up to 8mm) to accommodate new tube size:
Pumps mounted to the bottom of the drone:
Drone inlet and outlet tubes should be under tension like this to help keep centered:
