Page Comparison

...

• New faculty advisor: Brandon DeHart

  • Manager of the RoboHub, and will be attending some of our competition syncs this term to provide technical guidance.

  • Derek Wright was too busy

• Last flight test

  • Speed/Range/Obstacle avoidance

  • Did not test everything due to rain but some retune was done (needs more work)

  • Autonomy data collected

  • buck converter for RPi usb c port broke off

    • was untested

    • known issue with these board with respect to poor solder

• Next flight test

  • This Saturday

  • Testing video system, relay system, geological system, tuning

  • Leave bay at 10am

  • https://discord.com/channels/776618956638388305/1289257239957340221

  • 2024-10-05 Pegasus 2 & Houston - Flight Tests - WARG (atlassian.net)

• Hotplate ordered - Order procurement sent out for hot plate, will be ordered imminently

• Toaster oven not acquired yet - if you would like to help let me know

• Get the electronsite role if on site - reach out to Ryan Scomazzon if you have issues

• Can someone return the bmo5 connectors to Sarah’s office (E5 2104) - Andrew

• Midterm board order coming up Nolan Haines .

• Hot air gun broken - prob fixable?

  • If not see if we can get sponsored for a new one lol

  • Not blowing hot air??????

Reminders

• Don’t forget to fill out the team roster: https://forms.office.com/r/ka0MJHJQ9D

• Check out Conops for AEAC! Get involved in comp syncs for discussion https://www.aerialevolution.ca/annual-student-competition/

• Competition Architecture Sync: weekly Thursday at 8 PM in E5 2103.

  • 2024-10-03 Competition Architecture Sync - Meetings - WARG (atlassian.net)

  • Last competition sync: 2024-09-26 Comp Arch Sync - Meetings - WARG (atlassian.net)

• Fixed Wing Architecture Sync is on every other Wednesday at 8 PM in E5 2103

  • Not this week

• Lack of pilots next term - Reach out if off stream and interested

• If you are on a project and can use some help, reach out

...

...

• RPi Interface Rev C - Electrical - WARG (atlassian.net)

  • Daniel Puratich Project Manager, Principle Hardware Engineer

  • Siddharth Muralikrishnan Ahmed Osman Anthony Lazar Anthony Luo Shawn Yang

  • coming along, schem long in a week and layout in another week seems doable

  • LTE Breakout - Electrical - WARG (atlassian.net)

    • Canceled, now part of RPi Interface Rev C - Electrical - WARG (atlassian.net)

  • green tasks need to be done → need a lot of new components for this board, anyone is welcome to take them, but I actually need these done

  • Most components added to Library

• 12V -> 5V @ 4A Buck Converter + ELRS Board - Electrical - WARG (atlassian.net)

  • Kenny NaEngineer

  • Daniel Puratich PM

  • Layout in progress ~ 1 week, will be ready for midterm board order

• 24V->5V @ 5 A Buck Converter Board - Electrical - WARG (atlassian.net)

  • Schematic is under review by Kevin

  • Robert TangEngineer

  • Kevin Li PM

  • Placement almost completed

  • Will be ready for midterm board order

• Unified Video System - Electrical - WARG (atlassian.net)

  • Tom Chiu Individual Contributor

  • Layout revamped

    • New stackup will be

      • L1 - SIG/PWR

      • L2 - 2 signal traces, but otherwise, all GND

      • L3 - Uninterrupted GND

      • L4- SIG/PWR

    • Rerouted all signal traces on top and bottom layers with many via transitions. 2 signal traces remain on L2

    • I tried to ensure that the 2 traces on L2 did not lose gnd reference signal traces do not lose reference.

    • Removed 2 decoupling caps on the buck to save space.

    • Sourced a smaller linear regulator for the 12V-5V step down to save space as the current one is overkill based on the required power draw from it.

    • Please review whenever possible!

  • Worked with Jerry to understand the existing VTX system. Helped a bit with installation and creating the harness for PWM signal from pixhawk to lumenier switch board.

• 12S ESC - Electrical - WARG (atlassian.net)

  • Ethan Abraham Individual Contributor

  • Schematic nearly complete. Need to change MCU pinout to abide by AM32 hardware groups

  • Looking for a somewhat experienced EE to handle/help me with layout

• ELRS Redundant Diversity RX - Electrical - WARG (atlassian.net)

  • Nolan Haines Individual Contributor

  • Schematic completed, starting placement

  • Doesn’t need help but might later with routing

• Sensor Cluster - Electrical - WARG (atlassian.net)

  • Michael Botros

  • Schematic done, implementing some schematic feedback from Daniel

    • So far no one else has left any schematic comments

  • Going to start layout likely this week

• Pegasus wiring documentation

  • Ahmed Osman Jerry Tian

  • https://github.com/UWARG/hardware/tree/master/Harness schematic is here

Potential new project: Standard connectors fixed wing

...

Potential new project: Test Automation

• Needs Assessment (comparing to the manual test procedure we have rn):

  • 1. characterize our custom buck converter’s performance.

  • 2. understand our designs more, help ee members learn

    • Load transient test is helpful on identifying issues if downstream board is brownout during flight test

    • Knowing efficiency of the bucks

  • 3. efs running out of work to do

• Jerry’s was stuck on communicating

Action Items

This section is here for completeness. If a new task is assigned in a meeting, it will be added here.