...
Board Name | status | blockers | plan going forward |
---|---|---|---|
Tracking antenna |
|
| continue debugging and document process https://uwarg-docs.atlassian.net/wiki/spaces/Meetings/database/2752839681?entryId=8b156da0-b88f-4487-9034-999268a953df |
LED Lighting REV3 |
| none | |
6S Servo Module |
| ||
GPS Breakout |
| need to order new GPS boards | https://uwarg-docs.atlassian.net/wiki/spaces/Meetings/database/2752839681?entryId=e839dcd8-defc-42f1-8280-8e2c21fbeea5 |
Single Servo Driver |
| awaiting validation | https://uwarg-docs.atlassian.net/wiki/spaces/Meetings/database/2752839681?entryId=726878aa-bcb8-4728-9eed-18483cfb5c94 |
6s Power Module |
|
|
...
RPi Interface Rev C - Electrical - WARG (atlassian.net)
Daniel Puratich Project Manager, Principle Hardware Engineer
Siddharth Muralikrishnan Anthony Lazar Anthony Luo Shawn Yang
Descoping to be single side
On track for midterm
12V -> 5V @ 4A Buck Converter + ELRS Board - Electrical - WARG (atlassian.net)
Kenny Na Engineer
All done :)
24V->5V @ 5 A Buck Converter Board - Electrical - WARG (atlassian.net)
Robert TangEngineer
Kevin Li PM
Done :)
Unified Video System - Electrical - WARG (atlassian.net)
Tom Chiu Individual Contributor
Prob done by sunday
12S ESC - Electrical - WARG (atlassian.net)
Ethan Abraham Individual Contributor
Knowledge transfer done with Andrew Chai
Currently working on layout and initial placement
Estimated completion of placement will be by Sunday
One more week of iterations and improvement + another week for routing and cleanup
-Not midterm order
ELRS Redundant Diversity RX - Electrical - WARG (atlassian.net)
Nolan Haines Individual Contributor
Placement is complete, updated after review by Farris Matar
Layout rev 1 is in progress
Aim is to have this ready for midterm board order, grinding this week.
Sensor Cluster - Electrical - WARG (atlassian.net)
All components “grouped”, finishing up placement and will begin routing soon
Requested and waiting on 3D model for Lens+lens holder for LIDAR. will affect IR LED placement to ensure good lighting and no collisions
Meghan Dang Individual Contributor
Ian Van Den Steen for buck design and layout
done for sunday night
awaiting input from mech ppl for connector placplacement but is probably fine
Pegasus wiring documentation
Video system pending review
In future make schematic before work session
Deprioritized for comp stuff
Prob on hold rest of term
(Rev 2) Tracking Antenna Controller Improvements (M3) - Electrical - WARG
Still addressing comments from rev 1
Waiting on buck
Will reach out to Kenny Na if help is needed
done by sunday likely
UCB-C Sink - Electrical - WARG (atlassian.net)
finished layout today
needs meme ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
on schedule for midterm order
Fixed wing connector research (VBat, CAN, 5V)
No time to do anything here
Lmk if you would like to do this
ELRS Gemini Testing/Rev 2
testing on TX modules
all boards not functional
3rd board doesn’t turn on
check for shorts and probe power rails
rev 2 in development/arching stage
Water System Controller - Electrical - WARG
Shawn Yang Engineering
will be done by sunday
Straight CAN splitter
done - needs review (ping ppl)
butoon
LED Board Rev 4 - Electrical - WARG
Layout is complete and in review
Changes from previous rev
LEDs were changed to 1655 LEDs (Larger, brighter than the WS2812B-2020)
Minor bug fixes (fixed LDO pinout, fixed MCU pinout)
Did I miss anything?
...