Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Some concerns or discussions Jerry waant to bring up:

  1. goals of W24 (focus on comp critical projects)

    1. Harness

      1. Neel and I need guidance on the harness, maybe we do a project handover?

    2. Gemini testing (what is the status on this, is it just firmware now)

    3. LED pcb

    4. tracking antenna?

    5. high current power module?

  2. EE meeting and work sessions

    1. I like when the workshop/tutorials is related to a specific project, like what Farris’ feedback control for 6S ESC.

  3. New projects?

    1. we don’t have enough members for the amount of projects we have rn.

    2. CAN sensor boards

  4. PCB project support

    1. what should I do when I give out wrongg advices??

  5. W24 flight test schedule

    1. drone harness

    2. LED

    3. ELRS gemini (ground test)



“copied from last term EE leads meeting notes”

Topics

  • Priority projects that we need to support and splitting project support

  • EE Meetings and work sessions

  • Coming up with new projects

  • Using Asana

 Priority projects

  • Every project exists in discord channel, asana and confluence page

  • Split up who's managing which PCB projects

    • Michael:

      • ELRS - Comp critical

      • High Current Power Module - No longer comp critical

      • PDB - Not comp critical

    • Nolan:

      • Tracking Antenna - Comp critical

      • LED Driver board - Comp critical (for extra points)

    • Mena:

      • 6S ESC - Not comp critical

      • 12S Servo Module - Not comp critical

  • Project process

    • Brainstorm project → Block diagram → Component Selection → Schematic → Schematic Review → PCB Design → PCB Review → Sourcing → Assembly → Testing

  • Drone and wiring diagram

    • Mena and Nolan will work on it

      • Try to get Neel into wiring diagram with you guys

      • We will heavily promote and we will do a demonstration of the wiring in the first electrical meeting

      • Michael will also try to contribute

 EE Meetings and Work Sessions

  • Ideally EE weekly meetings stay the same as last term

    • Michael cannot attend meetings before 9PM

      • Will people show up in person at 9 for a weekly meeting?

      • Will people show up on weekends?

    • Perhaps Thursdays 9PM online meetings during the week

      • This is the current plan

  • Work Sessions

    • Great that wiring and assembly sessions already being handled

    • Potential room for workshops/tutorials

      • Brainstorm ideas for what to teach new members so its easier when crunch assembly sessions happen or you need a task done but no member knows how to do it on their own

      • Soldering/wiring/using PCB tools/OScope and power supply

    • Board assembly work sessions

 Coming Up with Projects

  • Sometime next week for sure, come up with list of new projects we can potentially support

  • Great opportunity to talk with Daniel, Anni as well as other subteams on projects they want to run that require EE support

  • CAN support, Really high current small buck board, power and wiring carrier board for drone etc

 ASANA

  • Instead asana used for every part of a PCB project, maybe its application can be used to specify certain actionable large level tasks with descriptions (sort of like a quest)

  • The 3 of us will do an Asana cleanup by 2023/9/13 (next Wednesday)

Misc

Flight Test Schedule Proposal

  • No labels