See Architecture confluence doc for 2023 ee info. All this is deprecated.

Brief

The purpose of this document is to list out electronics (and their alternatives) that will be on the drone. The type of electronic is listed and then solutions (listed by higher probability of use first) with their requirements. Power consumption will be documented for flight time calculation as well as electrical power converter decisions. Weight, size, and sundry mounting requirements will also be noted to assist mechanical. Final mounting location will be decided by mechanical.

List

• Battery

  •  

• Brushless DC Motor Controllers

  • BL Heli 51 or 80A units. (quantity ?) (part numbers ?)

    • Connected to battery and ZP3

• Computer Vision Processing Unit

  • Requested completion in #jetson

  • Nvidia Jetson TX2i

    • Power: 10-20 W

    • Size: Someone onsite please measure this

    • Weight: Someone onsite please measure this

    • Connections: Carrier board

    • Specifications source: https://www.arrow.com/en/products/900-83489-0000-000/nvidia

  • Connect Tech Quasar Carrier board

    • Power: Not specified (measure this?), 9-14V DC input

    • Size: Someone onsite please measure this

    • Weight: Someone onsite please measure this

    • Connections: ZP3 for communications and a camera for input

    • Specifications source: Quasar Carrier for NVIDIA® Jetson™ TX2/TX2i - Connect Tech Inc.

• Flight Controller

  • ZeroPilot 3.0

    • Power: 7-60V, less than 500mA

    • Size: 75x75mm not including case

    • Weight: 6 oz

    • 6

  • Nucleo L5

    • https://www.digikey.ca/en/products/detail/stmicroelectronics/NUCLEO-L552ZE-Q/11501277

    • NUCLEO-L552ZE

    • USB needs to be accessible

    • Weight: 5 oz

  • PX5

    • Weight: 9 oz

• Global Positioning System

  • VN-300 Rugged

    • Power: In datasheet

    • Size: main unit and 2 antennas with grounding planes

    • Weight: Negligible

    • Mounting: antennas should be spaced out as much as possible to improve GNSS accuracy

    • Full Datasheet (not available online in latest revision): discord link to download

    • Limited Datasheet: https://www.vectornav.com/docs/default-source/datasheets/vn-300-datasheet-rev2.pdf?sfvrsn=1e27aef3_10

    • Antenna Datasheet: https://www.tallysman.com/app/uploads/2018/11/Tallysman®-TW2412-Datasheet.pdf

  •  

• Data Transmitter

  • RFD900

    • Transmitter: RFD900 Radio Modem — Copter documentation

    • Antenna: https://www.truerc.ca/shop/900mhz-3/transmitter-900mhz-3/singularity-868

      • Antennas need two mounted in two unique planes

    • Wired to AZP3 & Ardupilot

• Video Transmitter

  • RMRC V2-800MW1300MHZTX-US

    • Transmitter: RMRC 1.3GHz 800mW Video Transmitter - USA Channels

    • Antenna: https://www.truerc.ca/shop/1-3ghz-3/transmitter-1-3ghz-3/singularity-1280-v2

• Nav Lights

  •  

• Passenger Indicator Light

  •  

• Optical flow sensor (two)

  • Wired to ZP3

  • Wired to Ardupilot

  • Downward facing

• Actuator

  •  

• Inertial Measurement Unit

  • Center around CG.

• Pilot Camera (two)

  • forward, downards

• CV Camera (??)

  • downwards, centered

• Power Distribution Board

  • ?? → I like the mateksys ones PDB FCHUB-12S for XCLASS – Matek Systems