May 05, 2023 - Practice Flight

Owned by Hamza Ali, created
Last updated: 2024-04-27 by Daniel Puratich
2 min read

Make sure to update the Title following the format “Jan 01, 2020 Flight Test”

 Flight Preparation

Requested by:

Comp Team

Required Sub-teams

Comp Team

Requested Date

May 5, 2023

Location and Time

CED Alma

Summary & Goals

Endurance testing on Icarus

Approved?

Yes

Pre-Departure Checklist

Check battery status
Charge if required, otherwise place into flight box
Systems test
Check flight controller orientation
Check motor spin & rotation direction
Check transmitter mappings
Verify communication links (VTX/RX, Controller, Groundstation)
Verify the mission planner is logging data
Only attach props directly before flight (keep off at all other times)
Mission Briefing
Plan of action
Delegate and brief on flight line roles
Key flight characteristics to observe
Key system characteristics to observe
Measurements to be made

Pre-flight Safety Checklist

Air Frame
Check all antennas, ensuring they are secure and in good condition
Check the battery emplacement and secure attachment and ensure there are no cracks
Check that all lights are operating normally
Check that all sensors are secured and clear of any obstructions
Check that the GPS is receiving satellites and providing a navigation solution
For fixed wing aircraft, Check:
Wings, ensuring they are securely attached to fuselage
Wing leading edge surfaces
Top and bottom of wing surfaces
Wing tip surfaces
Read of wing and all flight control surfaces for freedom of movement, security and any skin damage
For rotary aircraft:
Inspect top and bottom of air frame arms for cracks, loose parts, or signs of damage
Check fluid levels and ensure no leaks if applicable
Control Surfaces
Ensure Elevator moves correctly
Ensure Ailerons move correctly
Ensure Rudder moves correctly
Landing Gear
Check landing gear is secure
Inspect skids or wheels, especially attachment points
Propellers / Rotors
Ensure propeller is secured
Check for nicks, chips or cracks
Ensure prop direction is correct
Batteries
Inspect to ensure there is no signs of swelling, external leaking or other defects
Battery wiring and connectors from the battery are connected securely
Batteries (and spares) are adequately charged
Wires are not pinched
Control Station / Receivers / Transmitter
The battery and spare batteries if required are adequately charged
Control Station device and cables are properly connected and functioning
All flight interfaces are functioning normally
Safety
Good visibility and safe wind speed
Surrounding is free of obstacles
Crew far from drone
General Site Survey
Ground Recording / drone footage on
Autopilot
Control surfaces respond to autopilot in the correct manner
Transitions between flight modes have expected effect
Return-to-home systems, if present, have been configuredFlight Test Post Mortem

Action Items