OFS Mount V2

 

Big Project

Project

Project Manager

Big Project

Project

Project Manager

Houston

OFS Mount V2

@Smile Khatri

Task Description

Design and 3D print a mount for the Optical Flow Sensor (OFS) that fixes to a 30.5 x 30.5 mm mounting pattern. Details about the OFS are in Optical Flow (OFS) - SysInt - WARG (atlassian.net)

This is the old one that was made: Houston - OFS Mount - Mechanical - WARG (atlassian.net)

Constraints

Constraints

Written By

Append Date

Constraints

Written By

Append Date

3D printed

@Smile Khatri

2024-10-10

Mounts to a 30.5 x 30.5 mm grid pattern. Uses M3 mounting holes.

@Smile Khatri

2024-10-10

Relevant Contacts

Subteam

Contact

Contact Description

Subteam

Contact

Contact Description

Subteam collaborating with

@ of contact

what is the contact responsible for?

Assignees

Assignee

Asana Task

Date

Assignee

Asana Task

Date

@Collin Tan

link to asana task assigned

2024-10-10

Task Progression/Updates

Author: @Smile Khatri Date: 2024/10/10

Design review

  • Will need to increase spacing b/w the mounting hole and the side walls so that the bolt head does not interfere with the mount

    • image-20241011-004253.png
  • What is the current plan to secure the OFS sensor?

    • I am thinking we could ziptie it and add a double sided thick tape between the OFS mount and the OFS. Thoughts?

Design V2: 2024/10/10

  • Increased spacing for bolt heads.

    • Increased overall length of mount by 2mm.

  • Increased slope/length on lower quadrant to reduce weight and allow more space
    for zipties

    image-20241011-010057.png