Next Flight Test

@Evan Janakievski

2025-02-15 is the next flight test.

Watch out for weather cancellations.

https://discord.com/channels/776618956638388305/1338367711578951680

Next Work Session

@Evan Janakievski

• No official work session, but I will be on campus on Friday working on a few tasks if you are free and want to help out in any way.

Other Announcements

@Alison Thompson

• Bay door is broken - do not use until further notice

  • never put material under the door

  • If the door gets stuck on something, use the STOP button, do not try to remove material while door is trying to lower!

• Fill out roster for W25! You MUST do this before you will be assigned any tasks: Microsoft Forms

Eclipse frame stuff

@Evan Janakievski

• Issues with mounting Eclipse wings to airframe after assembly of wings had begun

  • will look into this tmr unless others have checked already

  • off by 2 mm

  • might be on both wings

Eclipse Landing gear

@Evan Janakievski

• Last part is ready to be picked up. Will be grabbing it from the E3 machine shop on Friday and can bend the part if machine shop is open

Eclipse Fuselage

@Sohee Yoon

• Fuselage is finished, will need to check the fit with the spars attached

• Waiting on spars to test the fuselage fit

Eclipse Wings

@Nathaniel Li

• need to locate pitot tube tubing in the bay (white plastic bag with small diameter tubing). Worst case order a back up pitot tube and use tubing from that one.

  • @Camilo Artigas Alos Did u see it when you test fitted the pitot

  • Nathaniel to order another one

• Waiting on EE to wire

Comp Electronics

@Nathaniel Li

@Khalil Ramzi @Arnav Gupta I’m currently reviewing IR Camera Mount if it looks good, I’ll let you guys know and we can get it printed

Comp Payload

@Alison Thompson

• Tank printed fine

Peggy 2 Landing Gear

@Evan Janakievski

• In process of switching the landing gear back to the straight landing gear

  • Will work on this on Friday