Bay Policies

Introduction

• Our bay is located in E5 1006

  • On google maps it is at https://www.google.com/maps/place/Waterloo+Aerial+Robotics+Group+(WARG)/@43.4729743,-80.5402408,90m/data=!3m1!1e3!4m6!3m5!1s0x882bf4011ee0de41:0x4380e137162ec41c!8m2!3d43.4730117!4d-80.5400826!16s%2Fg%2F11cm42xfkj?entry=ttu&g_ep=EgoyMDI0MTIxMS4wIKXMDSoASAFQAw%3D%3D .

• Requirements to enter the bay are:

  • a member with the code in accordance with Bay Code

  • completion of the university learn trainings in New Member Onboarding

  • read, understand, and accept the bay policies and rules

    • these are documented as subpages to this page!

Shipping Address

Relevant Pages

• Bay Code Management: Bay Code

• Safety Training Requirements Listed In: New Member Onboarding

• Bay Cleanliness Specification: Bay Cleanliness

• WARG Equipment Policies: WARG Equipment for Non-WARG use

• RPC Policies: RPC Policies

• In-bay Merch Archive: Merch Archive

Bay History

Please see History for more general history; this section covers the bay history only.

• Before WARG collapsed in 2017 it was in E7 near the machine shop.

• WARG’s bay was in E5 2003 (From ~2020 to August 2023). This bay is above the regular SDC area and became quite small for our work sessions.

• In August of 2023 we were promoted to the SDC floor and a much larger bay (E5 1006).