PDB500[X]
https://powerdrives.net/pdb500
Description and cad models given by manufacturer
bottom of board has no components and can be leveraged for heatsinking, though shouldnt be neccessary
board power dissipated as heat should scale as load current through it from battery to motors increases
requires less cooling than an ESC for sure
do not over torque through holes.
all pads are labelled with + and - are the batt + and - and are shorted together and intended for high current
solder on the pads with wires will expand board dimensions
all the tiny contacts are for low voltage signals and gnd references. Can be brought out with vertical or right angle 100mil pitch connectors or directly solderred into with wires
Â
Â