Both Lightbridge pairs are currently paperweights/doorstops. See Lucy for the alternative system.

DJI Lightbridge documentation: https://www.dji.com/dji-lightbridge/info#specs

There are two systems: ground and air.

Setup:

• GoPro camera (microHDMI) → (microHDMI) Air system (TX) → (RX) Ground system (microHDMI) → (HDMI) DeckLink capture

Both systems must have the same firmware version to be able to connect to each other.

Ground System

The ground system has an internal battery and is charged by the provided barrel plug. See input voltage on the unit. The USB-A port is for a phone with the DJI Lightbridge app.

When turned on it will make a beeping sound. A flashing green light indicates that it’s not connected to the air system. A solid green light indicates that it has successfully connected.

Air System

The air system does not have an internal battery. It is powered externally. I (Xierumeng) used 12.6 V DC.

The cable is labeled in the same manner the air system port is labeled:

• The white end plugs into the air system

• The red end plugs has 2 pins inside that plug into a DC power source

• The yellow wires in the ribbon are not connected to anything

Open

There are two lights: One is for receiving data from the GoPro, one is for connection to the Ground system. Red is disconnected, green is connected.

The GoPro has an arrow with a rectangle when it’s attempting to output to an external monitor/system.