Airframe Drawings

Task Description

Create the drawings for all the parts needing to be machined for Eclipse.

The drawings needed are for the supports, motor mounts (drawing includes bend lines, not the features being water cut), and spars. (not yet tail boom)

The parts to be laser cut just need a dxf made, can be added to a folder in the Fixed Wing folder on PDM.

Parts needing dxf:

• Bottom plate

• Top plate

• Gussets

• Moter Mounts (still needing review)

Assignees

Task Progression/Updates

Author: @Evan Janakievski Date: Nov 12, 2024

Drawing Notes for Future Consideration:

• Overall, a good job

• For waterjet parts for WARG, we do not require drawings unless they require bending afterward

  • For a professional setting, you would need to dimension these like a normal drawing

• For the standoffs, you do not need to use section views, can just use a projected view

  • Choose a better scale that allows for the entire part to be seen. 5:1 is too large, 2:1 is better

• Do not use a drawing set for future drawings, please use individual drawings

  • Drawing sets are better used for assemblies, rather than multiple parts

• Our drawing template is not the best for large parts, I may try to fix this for the future. Small details in large parts are difficult to dimension for this reason