EP2 Case
Big Project | Project | Project Manager |
---|---|---|
Pegasus | EP1 dual Case | @Smile Khatri |
Task Description
Currently, our EP1 board (which establishes ELRS connection to allow remote control of the drone) is taped to the top x-frame plate. We want a better way to secure EP1.
The task is to design an enclosure which will shield EP1 and secure it properly onto the x-frame plate.
Constraints
Constraints | Written By | Append Date |
---|---|---|
ELRS antennas must be exposed | @Smile Khatri | June 12, 2024 |
Hole/slot for power cable | @Smile Khatri | June 12, 2024 |
Passive cooling by airflow | @Smile Khatri | June 16, 2024 |
Mounts to a 30 x 30 grid pattern |
|
|
Relevant Contacts
Subteam | Contact | Contact Description |
---|---|---|
Tech Director | @Nathan Green | Answer questions |
Assignees
Assignee | Asana Task | Date |
---|---|---|
@Pranav Bommireddipalli | link to asana task assigned | Date assigned |
Task Progression/Updates
Author: @Pranav Bommireddipalli Date: 2024/06/25
Created Initial Design
Made design compact to allow for easier mounting of the waterproofing dome: Weatherproofing Dome. Current plan is to 3D print it.
2 part design as of now, but a 1-part design where the EP2 slides in might be worth exploring as it would be a lot smaller.