XT90 + XT60 + XT30 Covers
- Alison Thompson
- Keegan Jeewan
Big Project | Project | Project Manager |
|---|---|---|
Comp 2025 | Electronics Cases | @Alison Thompson |
Task Description
We are looking to 3D print covers for our battery connectors to prevent shorting them out.
Example of covers can be found here, but you can do something different/more simple if you want: https://www.aliexpress.com/item/1005005584003868.html
These are only needed for the female end connectors.
Dimensions of the XT90 connectors:
XT30 DIMENSIONS
XT60 DIMENSIONS
Constraints
Constraints | Written By | Append Date |
|---|---|---|
Must be 3D printable | @Alison Thompson | Sep 26, 2024 |
Relevant Contacts
Subteam | Contact | Contact Description |
|---|---|---|
EE/Director/Person who asked us for them | @Daniel Puratich | Making sure we met his request |
Tasks
Assignee | Asana Task | Date |
|---|---|---|
@ assignee | link to asana task assigned | Date assigned |
Task Progression/Updates
Author: @ person updating Date: YYYY/MM/DD
Author: @Keegan Jeewan Date: 2024/10/01
SolidWorks CAD files were found for the XT90 connectors on GrabCAD. The dimensions were almost exactly the same as the 2D drawings provided above, so the caps were modelled based on 3D CAD found. Parts and assembly are now uploaded to PDM under COMP 2025 → Electronics → XT90 Covers.
Author: @Alison Thompson Date: Oct 28, 2024
I printed these, test fit was a bit too tight so I edited the tolerances on the parts a bit. Also added a flat bit to help remove the ones for male connectors.