Battery Shroud Clip Redesign
- Alison Thompson
- Christopher Arzoumanian
Big Project | Project | Project Manager |
|---|---|---|
Comp 2025 | Peggy 2.0 | @Alison Thompson |
Task Description
The current design for the battery shroud clips accounts for them being mounted on the outside of carbon fiber panel, we later decided we liked them on the inside better (after Alison installed on the wrong side ) but the current design snaps frequently when used like this. We want a version that is intended to mount on the inside of the panels. Unfortunately, the CAD of the panels does not match the real life geometry, so you will have to base this design off of the real life panels. The current clip design is in WARG_CAD\COMP2025\X-Frame\Battery Shrouds
Constraints
Constraints | Written By | Append Date |
|---|---|---|
Mates to the existing carbon fiber shroud design | @Alison Thompson | Mar 17, 2025 |
Clips to the existing clipping points on the frame | @Alison Thompson | Mar 17, 2025 |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
@ assignee | link to asana task assigned | Date assigned |
Task Progression/Updates
Author: @Christopher Arzoumanian Date: Apr 1, 2025
Changed battery shroud CAD to real life geometry
Extended surface where clip adheres to the shroud for ease of assembly and so that it can line up with clip holes better
The actual “clip” part works properly and was therefore left untouched
