16-11-2021
Dhruv U
Almost written the fetchInstruction state.
may combine this with decision module - pending discussion with Tony later tonight
Will delegate one of the tasks out to Manav
Anni and Aiden
Anni: “Simulation is kinda going”
need to write out some math for tracking changes in position/heading
Aiden
Messing with the board to get the motors to spin. Prep to test the PID controller.
Going to work on it working a little later this week.
Steven
Focussing on PathManager restructure
Met up with Elias to discuss the Path Manager and is fixing a bug currently
Tony
Rough draft of the decision module written out
Yash
Figuring out the UART communication link for CV. Doing research that explain how to make a UART connection link between two MCUs.
Nixon
Aadi testing later tonight to see if it works
Timeline unsure due to hardware issues
Manav
Still needs to be given a task. Will be given one after today’s firmware meeting
Neha
IMU is working and we are receiving data (6050 sensor)
Aadi
Went into bay today to help Nixon debug SD card driver, but could not access the document
Will finish testing the DMA stuff sometime later and once done, they will test mavlink