9/28/2021

Member

Updates

Action Items

Member

Updates

Action Items

@Avani Joshi

 

  • Complete power MOSFET selection

@Daniel Puratich (Unlicensed)

  • Characterized motor current draw up to 60% duty cycle at 16.8V input voltage

  • Continued working on the STM32F030RCT6 schematic symbol and PCB footprint

  • Setup a Confluence account

  • Schedule a meeting with VectorNAV to discuss sponsorship opportunities

  • Finish the schematic symbol and PCB footprint for the STM32F030RCT6 MCU

  • Continue learning about power electronic concepts

Eric Chiang

  • Completed necessary portions of the Altium Designer bootcamp (has prior work experience with Altium Designer)

  • Learn BMS related content

@Jason Skells

 

  • Complete power MOSFET selection

  • Complete the schematic symbol and PCB footprint for the DRV gate driver chip

@Kevin Li

  • Characterized motor current draw up to 60% duty cycle at 16.8V input voltage

  • Perform a power budget on the drone’s LV loads (5V and 3.3V)

@Kiran Surendran

  • Continued working on the STM32H747IGT6 schematic symbol and PCB footprint

  • Finish the schematic symbol and PCB footprint for the STM32F030RCT6 MCU

@Muhammad Tanveer

  • Continued working on the BMS schematic

  • Continue MOSFET and current sense calculations to finish component selection

  • Bring Eric Chiang and Taha Khalid up to speed on the BMS project and related preliminary content to learn from

@Seungmin Hong

  • Finished Altium Designer bootcamp

  • Converse with Mech to determine design parameters for the gimbal PCB

@Taha K.

  • Finished Altium Designer bootcamp

  • Learn about BMS related content