3/9/21 Meeting

Owned by Brielle Chenier
Last updated: 2021-03-10
1 min read

Materials:

  • Recommend we use CNC cutting method (link page) because other way requires more specific skills

  • Options: balsa wood or foam, composites

  • Fixing composites is hard but could use a good mold and make spares

    • Take are rough

  • VTOL is cool

  • 2 options:

     

Quadcopter - 4 motors, no servos

Quadcopter w/motor at end: 5 motors, no servos

Switchblade: 5 motors, 4 servos

Hybrid: 4 motors, 4 servos

 

Priorities: feasibility

 

To do: reserach competitions